Waterproof metal pushbutton with white LED ring 16mm

Waterproof metal pushbutton with white LED ring 16mm

Waterproof metal pushbutton with white LED ring 16mm

    5.390 5.390 5390.0

    SKU MCI01441
    Normal Price
    5.390
    Discount by Quantity
    If you buy 10 pay $ 4.851 each one.
    If you buy 100 pay $ 4.312 each one.
    Availability
    Showroom MCI Store : Sold Out
    Luis Thayer Ojeda Store : Available
    Viña del Mar Store : Sold Out

    Description: These chrome-plated metal buttons are rugged and waterproof and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep any water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a white plastic LED ring. On the back there are 3 contacts for the button (common, normally-open and normally-closed) and 2 for the white LED ring (+ and -). Connect 3 to 6V to the LED to have it light up nicely, there's a built in resistor! If you want to use this with a higher voltage, say 12V or 24V, simply add a 470 ohm resistor in series with the LED connection to keep the LED current at around 20mA. 


    This button is a momentary push button, when you press it the 'normally-open' contact shorts to the common contact. When you release it, the contacts open up again.

    The switch and LED are separated, so you could wire it to turn on when pressed or vice versa or whatever you wish!
     
    Specifications:
    • Drill hole diameter: 16mm
    • Switch rating: 3A / 250VDC
    • Switch contacts: 1 NO, 1 NC
    • Material: Chrome plated brass
    • Grade: IP40/IP67
    • Contact resistance: < 50 mOhm
    • Insulation resistance: > 1000 Mohm
    • Temperature: -20 C to +55 C
    • Mechanical life: > 500,000
    • Electrical life: > 50,000
    • Panel thickness: 1-13mm
    • Operating pressure: 1.5 - 2.5 N
    • Operating stroke: 2mm
    • Lamp rated voltage: 6V